BLAUPUNKT 300AMP Heavy Duty Booster Cable

BLAUPUNKT 300AMP Heavy Duty Booster Cable

Brand:Blaupunkt
Amp:Up to 300A
Material:Copper Clad Aluminum (CCA)
Clip:C2 black & red clamp
Wire:Orange cable
Support: can up to 3000cc petrol vehicle
Conductor Area:25mm²
Length:2.5m
**************************************************************************************************************************
Steps to JUMP START a vehicle using cable:

1. Make sure both cars are turned off.

2. Connect one end of the red (positive) jumper cable to the positive terminal on the stalled battery.

3. Connect the other red (positive) cable to the positive terminal of the good battery.

4. Connect one end of the black (negative) jumper cable to the negative terminal of the good battery.

5. Connect the other black (negative) cable to a clean, unpainted metal surface under the disabled car’s hood.

6. Start the car that’s doing the jumping; run for 2 to 3 minutes before starting dead car.

7. Remove cables in reverse order.

8. Keep jumped car running for at least 30 minutes to give battery sufficient time to recharge.

BLAUPUNKT BOOSTER CABLE

https://www.youtube.com/watch?v=Dhcczl3yWIo